BioPro Disposable Coverall

Part #: 10-800-(Size), 10-850-(Size)

Assembled from Lakeland’s MicroMax material, the BioPro Disposable coverall is targeted at hospital workers and EMS technicians who are dealing with a patient presenting symptoms associated with potentially deadly pathogens and other biological contaminants while on the job.

Key features of the BioPro disposable suit include integrated elasticated thumb loops to prevent sleeves from rolling up and attached sock boots with boot flaps to minimize the need for taping. The suit is hooded with a respirator fit hood to protect the neck and minimize exposed skin and the liquid-proof zipper is placed on the rear of the suit to ensure that potentially contaminated hands are kept away from the face during donning and doffing procedures.

For a true liquid-tight seal without any tape, the optional push fit glove connection system allows for gloves down to 15 mil in thickness to be attached to the suit with minimal setup time.


  • Seams chain-stitched through all layers for a clean finished edge and splash-proof protection
  • Integrated sock boots with boot flaps
  • Integrated thumb loops ensure compatibility with a wide variety of gloves of various thicknesses
  • Liquid-proof zipper


BioPro Disposable Suit Specifications

Suit MaterialMicromax
VariantsFront-entry w/ neck dam, Rear-entry w/ respirator-fit hood
SizingS - 3 XL
Case Quantity12

BioPro Disposable Suit Physical Testing Results

Physical PropertyTest MethodUnitsTest Results
Basis WeightASTM D3776oz/yd22.1
Grab Tensile MDASTM D5034lbs32.4
Grab Tensile XDASTM D5034lbs32.6
Trapezoidal Tear MDASTM D5733lbs5.1
Trapezoidal Tear XDASTM D5733lbs6.2
Surface ResistivityASTM D751N/APass
Diazinon100%60 mins Pass
Motor Oil - 40 wt100%60 mins Pass
Bleach (Household)100%60 mins Pass
Isocyanite-based Paint100%60 mins Pass
Sodium Hydroxide100%60 mins Pass
Sodium Hyperchlorite100%60 mins Pass
Blood3.2 x 108 (PFU/mL)Assay Results PFU/mL < 1Pass

Test Methodologies

Chemical resistance data is in accordance with ASTM F1001 test methodology. Testing is performed on fabric samples only, not actual garments. Sample results vary and therefore averages for the results are reported. Sources for all test data are independent laboratory conditions and not actual use conditions.


All PPE, regardless of approval, should not be used without medical sign-off by a certified physician or without the approval of a qualified safety manager.

The BioPro Disposable Coverall is not flame resistant and should not be used around heat, flame, sparks, or in potentially flammable or explosive environments.

The BioPro Disposable Coverall should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.